How to Recover Data from Hard Drive that Won’t Boot

Hard drive crashes are a fact of life. They happen frequently enough that it’s almost a guarantee that at some point, you’ll have to deal with a failed hard drive. But there’s no need to panic.

In this article, we’ll show you how to recover data from a hard drive that won’t boot up. Discover how to extract data from a non-boot hard drive and free up as much space as possible.

What Causes a Hard Drive to Stop Booting?

A hard drive can stop booting for a variety of reasons. The most common ones are:

  • A virus that damaged the hard drive’s files
  • A power outage that caused the hard drive to lose power
  • A problem with the boot sector, which is a part of the hard drive that helps it startup

Recover Data from a Non-Booting Hard Drive

If you’ve just had a hard drive crash and your data is no longer accessible, don’t worry. In this article, we’ll show you hdd data recovery from a non-boot hard drive so that you can access the data.

First, take a look at your computer to discover what type of hard drive it has.

If it looks like your computer has an IDE hard drive, then you should be able to use the built-in recovery partition on your hard drive to regain access to your data.

It may also have a SATA or SCSI hard drive with a separate recovery partition. In this case, we recommend using a free program like Testdisk for Windows or TestDisk for Mac.

Create an Image of the Hard Drive

You’ll need to create an image of the hard drive before you can extract data. This will allow you to recover the contents of the hard drive. You can use a program like AOMEI Disk Partition Assistant Standard Edition to make a bootable disk that allows you to access the data on the hard drive.

Install and Set Up a Recovery Disk

First, you’ll need to install and set up a recovery disk. Here’s how to do that using the Windows 10 operating system:

1) Insert your Windows 10 recovery media into your computer’s DVD drive so that it can boot from it

2) On the desktop, right-click on the Start button, and choose “Troubleshoot > Advanced Options > Command Prompt > Launch in Administrator Mode”

3) Your computer will restart and access the command prompt. Once inside, type diskpart and hit enter.

4) Type list disk and press enter to list all of your disks in order

Recover Data from the Recovery Disk

If you have a hard drive that won’t boot up, then you need to find a way to recover data from the recovery disk. This process is more complicated than it sounds.

It takes some time and patience, but with these steps, you should be able to extract as much data as possible from the recovery disk.

  • Shut down your computer
  • Remove the hard drive from your computer
  • Insert the recovery disk into your computer
  • Turn on your computer and follow the on-screen instructions.

Remember that this process will take some time and requires patience.

Final Words

If your hard drive doesn’t boot anymore, don’t worry. This blog will help you restore data from it. We discuss what causes a hard drive to stop booting and provide instructions on how to recover data from a non-booting hard drive.